Views: 0 Author: Site Editor Publish Time: 2022-11-29 Origin: Site
High leverage long nose pliers are generally made of carbon steel, which is first forged and rolled into plier shape, and then subjected to metal machining such as grinding, polishing, and finally heat treatment.
What role do high leverage long nose pliers play?
What is the composition of high leverage long nose pliers?
What are the precautions for using high leverage long nose pliers?
High leverage long nose pliers are mainly used for cutting single-strand and multi-strand wires with thin wire diameters, bending single-strand wire connections, stripping plastic insulation, etc. used. It is also one of the tools commonly used by electricians (especially internal electricians). High leverage long nose pliers consist of a pointed tip, a knife edge and a pliers handle. The handle of the electrician pointed pliers is covered with an insulating sleeve with a rated voltage of 500 V. The high leverage long nose pliers have a pointed head, so it is necessary to use pointed pliers to bend the wire connector in small spaces: first bend the end of the wire to the left, and then clockwise against the screw to the right.
The handle of the high leverage long nose pliers effect is available in three versions: straight handle, curved handle and bow handle according to the handle. The pliers are often used in contact with current conductors such as wires, so the handle is generally covered with a protective tube made of insulating materials such as polyvinyl chloride to ensure the safety of the operator.
①The use of high leverage long nose pliers is operated with the right hand. Turn the jaws inward, which is convenient to control the cutting part of the pliers. Grab your little finger between the two plier handles to press the plier handles and open the plier head so that the plier handles can be flexibly separated.
②The high leverage long nose pliers blade can be used to cut the rubber or plastic insulation layer of flexible wires.
③The blade of high leverage long nose pliers can also be used for cutting wires and iron wires. When cutting galvanized iron wire no. 8, use the blade to cut the surface back and forth a few times, and then just gently pull it, and the wire will break.
④The guillotine can also be used for cutting carbide wires such as wires and steel wires.
⑤The insulating plastic pipe of long nose pliers with high leverage effect has a voltage strength of more than 500 V and can cut the wire with current. Do not throw it over during use, so as not to damage the insulating plastic pipe.
⑥Do not use high leverage long nose pliers as hammers.
⑦Do not use high leverage long nose pliers to cut double strand current-carrying wires, as this can lead to a short circuit.
⑧ If you are using high leverage long nose pliers to wrap the tire to fix the tension wire, the pliers should clamp the wire and wind clockwise.
⑨ It is mainly used for cutting single-strand and multi-strand wires with thin wire diameters, bending the joints of single-strand wires, stripping plastic insulation layers, etc.
This is all about the high leverage long nose pliers! If you would like more information about the high leverage long nose pliers, please contact SAAME Tools Shanghai Imp. & Exp. Co Ltd.